1 2 3 4

SM pumps

pompa smSelf-priming SM4.02 pumps, vortex, ring, with a side ring channel are used to pump non-aggressive liquids, except fuels, in the corrosion resistance range of materials used in pump parts. Liquids of a temperature up to 70°C, density 1000 kg/m3, viscosity up to 150 mm2/s, contaminated with traces of solid firm particles of the size up to 0.5 mm can be pumped. These pumps can provide initial air pressure in a tank and supply air to a tank together with liquid by using a check inspiration vent. Pressure in the pump cannot exceed 1.0 MPa. They can be used for liquids, vapours of which are not poisonous or explosive, and have good lubricating properties (e.g., water), with temperature 20°C lower from a boiling point at a pressure in the suction tapping. Their applications include: water supply automates and systems and other remote controlled equipment. They can also work in portable equipment, and slight leakage on hoses or connections does not cause significant work disturbances.
The greatest advantage of SM4.02 pumps is their ability for automatic suction, without a need to fill the suction hose with liquid. The pumps can work with motors with power frequency of 50-60 Hz.

Typical self-priming pump applications
Self-priming vortex pumps are used to pump clean water from tanks and shallow dug wells, in which the water level is at the maximum depth of 7 m from the ground surface.
A basic advantage of a dug well with a self-priming pump is a low cost of such investment. Household water demand frequently fluctuates. Therefore, to ensure optimum self-priming pump operations, use of water system automates (pump + hydrophore tank + protection and control system). Protection and control systems protect a pump motor against short-circuit, phase failure, overload, supply asymmetry or dry work consequences.

Water supply for households

Self-priming pumps are also used in water supply systems providing water for houses and residential estates.

Irrigating systems

Self-priming pumps are used in irrigation systems for crops and green areas.
Main advantages of Hydrovacuum self-priming pumps:
• guaranteed many years of reliable work
• easy access to spare parts
• execution of individual requirements and product customisation to customer requirements
• continual technical supervision, and guarantee and post-guarantee technical servicing
• low purchase and operation costs
• long life cycle in difficult operating conditions.

Construction

pump parts

material

bodies

grey cast iron

sections

grey cast iron

rotors

tin bronze

shaft

stainless steel

bearings

monoblock pump

sealing

mechanical

 

Technical parameters

Technical parameters

symbol

unit

value

capacity

Q

m3/h

0.3-4.5

head

H

m

up to 72

connector diameter

DN

mm

25-32

pumped liquid temperature

t

°C

up to 70

liquid density

ρ

kg/m3

up to 1000

liquid viscosity

 

mm2/s

up to 10

weight

m

kg

13,3 - 27,0

motor power

P

kW

0,37-1,5

voltage

Un

V

230/400

 

Characteristics
- for SM.4 pumps

Q

m3/h

2,5

3,5

4,0

4,5

l/min

42

58

67

75

Typical pump dimensions

H

P

H

P

H

P

H

P

SM.4.02 pump

51

1,4

34

0,95

26

0,8

16

0,6

H – head [m]
P – power on pump shaft [kW]

 

 pompa sm chka

Dimensional drawing

pompa sm rys-gab1

 

pompa sm rys-gab2

Pump cross-section

pompa sm rys3

Technical data

pump type

motor

Unit weight [kg]

mechanical size

power [kW]

voltage [V]

SM.4.02

SELg90-4SF/42B

1,1

230

26

SM.4.02

SELg90-4LF/42C

1,5

230

27

SM.4.02

STLg90-4l/42B

1,5

400

25,6



See also other products in this category: